vcp certification VCP550D questions are avaialble. The VCP550D Exam consists of 65 questions and a short pre-exam survey consisting of 8 questions.The VCP550D exam is available in English.The time limit for the VCP550D exam is 75 minutes, with an additional 15 minutes to complete the survey questions and agreements.
Share vcp certification VCP550D questions below.
A vSphere administrator enables and configures a Software iSCSI Initiator, and configures an iSCSI vmkernel portgroup with Port Binding. The SAN administrator creates a few LUNs on an iSCSI server. However, when the vSphere administrator adds the IP address of the iSCSI server in the Dynamic Discovery list, no iSCSI targets are detected. What condition would result in this behavior?
A. The iSCSI vmkernel portgroup and the iSCSI server are on different subnets.
B. The iSCSI server IP address should be entered in the Static Discovery instead of Dynamic Discovery list.
C. The network card bound to the iSCSI portgroup is 1Gbps Ethernet instead of 10Gbps.
D. A Software iSCSI Initiator cannot use Port Binding in conjunction with Dynamic Discovery.
A vSphere administrator configures a preferred heartbeat datastore in an HA/DRS cluster configuration. The vCenter Server identifies an alternative preferred datastore. Why would vCenter Server identify an alternative preferred datastore over the administrator’s preference?
A. The selected datastore contains powered-on virtual machines.
B. The selected datastore is formatted with a 1 MB block size.
C. The selected datastore is an NFS datastore.
D. The selected datastore is not accessible to all of the hosts.
The load is high on a HA/DRS cluster. DPM is enabled. A vSphere administrator determines that hosts are NOT powering on automatically to support the load. Which configuration would result in this condition?
A. VM-to-VM or VM-to-Host DRS rules have been configured that restrict where some VMs can be moved.
B. DPM has been set to the most Conservative threshold.
C. Some of the virtual machines have been removed from HA consideration by the vSphere administrator.
D. DRS is set to Manual Automation.