Category Archives: Cloud

23 Apr

2V0-621 Online Test-VMware Certified Professional 6 – Data Center Virtualization Beta Exam

Currently, our 2V0-621 online test only provide 20 questions. Answer one question correctly, you can get 5 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

In a vSphere High Availability cluster, what is the VM Monitoring I/O stats interval default value?

 
 
 
 

An administrator enables High Availability (HA) on a Virtual SAN cluster.
There are four vmkernel port groups with the following IP addresses assigned:
-Management: 192.168.12.10
-vMotion: 192.168.13.10
-Virtual SAN: 192.168.14.10
-Fault TolerancE. 192.168.15.10
Which IP address will HA use for traffic?

 
 
 
 

An administrator wants to configure a High Availability cluster to allow virtual machines a 10 minute window to shut down in the event of a Host Isolation incident. What two configuration settings would satisfy this requirement? (Choose two.)

 
 
 
 

A vSphere 6 High Availability cluster has been configured with default settings. Four virtual machines in the cluster have been configured with these priorities:
-Prod-DB. High
-Prod-Email: High
-Prod-VC. Medium
-Dev-VDI: Low
How many VM Overrides would need to be defined at the cluster level to meet the restart priorities?

 
 
 
 

Which two settings are required for Virtual Machine Component Protection (VMCP) to protect from All Paths Down (APD) and Permanent Device Loss (PDL)? (Choose two.)

 
 
 
 

Which two options are available in the Virtual Machine Component Protection (VMCP) setting Response for Datastore with All Paths Down (APD)? (Choose two.)

 
 
 
 

Which two statements regarding Distributed Resource Scheduler (DRS) affinity rules are true? (Choose two.)

 
 
 
 

An administrator wants to set a non-default isolation address of 192.168.1.2 for High Availability. Which advanced setting would accomplish this task?

 
 
 
 

How does vSphere High Availability calculate the memory slot size of a virtual machine?

 
 
 
 

Which two identification sources can a vSphere Auto Deploy rule use to identify target hosts? (Choose two.)

 
 
 
 

An administrator has decided to create 10 ESXi 6.x hosts via Auto Deploy for a new Test/Dev cluster. The hosts are configured to obtain their networking configuration via DHCP.Which Direct Console User Interface option should the administrator use to renew the DHCP lease for the hosts?

 
 
 
 

An administrator is deploying ESXi 6.x hosts using Auto Deploy and wants the image profile to be available, even after closing and opening a new PowerCLI window.Which command can be used to ensure that image profiles are preserved across PowerCLI sessions?

 
 
 
 

Which two are valid compliance results that indicate the need to apply a Host Profile? (Choose two.)

 
 
 
 

An administrator is using Auto Deploy to create several ESXi 6.x hosts that will be connected to a vSphere Distributed Switch. After the hosts are deployed, the administrator notices that LACP packets are not being sent between them. Which statement best describes why this issue is occuring?

 
 
 
 

An administrator plans to use VMware Converter Standalone to convert a virtual machine to a vSphere environment. The source virtual machine has these properties:
-Running Windows 2008 R2
-Contains one NTFS formatted volume
During conversion, how many virtual disks can the administrator add to the destination virtual machine?

 
 
 
 

An administrator needs to migrate a legacy physical application server to a virtual machine within a vSphere 6 cluster. As part of the conversion, the administrator must reduce the size of the virtual disks.
What action should the administrator take to create a virtual machine with smaller virtual disks than the original physical server?

 
 
 
 

An administrator needs to recover disk space on a previously-used thin provisioned virtual disk. The volumes where the administrator needs to recover the disk blocks are on VAAI-compliant storage arrays. Which two actions should the administrator take accomplish this task? (Choose two.)

 
 
 
 

When attempting to place a datastore in Maintenance Mode, the task remains at 1%.What are two potential causes for this? (Choose two.)

 
 
 
 

What are two likely causes for a DRS cluster to become unbalanced? (Choose two.)

 
 
 
 

Which two scenarios would cause a Fault Tolerance-enabled virtual machine to fail to power the Secondary virtual machine? (Choose two.)

 
 
 
 

Question 1 of 20

 

vca-vcp.com cart

22 Apr

VMware 2V0-621D Exam Sample Questions

VMware Certified Professional 6 – Data Center Virtualization Delta Beta is the exam name of 2V0-621D test. There are 75 questions in real VMware 2V0-621D exam, which will take the candidates 90 minutes to complete the test. The Associated Certification is VCP6-DCV. The exam price is $50. The exam language is English. The exam format is Single and Multiple Choice.

Share VMware 2V0-621D exam sample questions below.

In a vSphere High Availability cluster, what is the VM Monitoring I/O stats interval default value?
A. 60 seconds
B. 90 seconds
C. 120 seconds
D. 180 seconds
Answer: C

An administrator enables High Availability (HA) on a Virtual SAN cluster.
There are four vmkernel port groups with the following IP addresses assigned:
•Management: 192.168.12.10
•vMotion: 192.168.13.10
•Virtual SAN: 192.168.14.10
•Fault TolerancE. 192.168.15.10
Which IP address will HA use for traffic?
A. 192.168.12.10
B. 192.168.13.10
C. 192.168.14.10
D. 192.168.15.10
Answer: C

An administrator wants to configure a High Availability cluster to allow virtual machines a 10 minute window to shut down in the event of a Host Isolation incident. What two configuration settings would satisfy this requirement? (Choose two.)
A. Set the advanced option das.isolationshutdowntimeout = 10.
B. Set the advanced option das.isolationshutdowntimeout = 600.
C. Configure Host Isolation Response to Shut Down and Restart VMs.
D. Configure Host Isolation Response to Power Off and Restart VMs.
Answer: B, C

vca-vcp.com cart

21 Apr

2V0-621D VMware Certified Professional 6 – Data Center Virtualization Delta Beta

VMware Certified Professional 6 – Data Center Virtualization Delta Beta is the exam name of 2V0-621D test. There are 75 questions in real VMware 2V0-621D exam, which will take the candidates 90 minutes to complete the test. The Associated Certification is VCP6-DCV. The exam price is $50. The exam language is English. The exam format is Single and Multiple Choice.

This beta 2V0-621D exam validates you have the skills required to successfully install, deploy, scale and manage VMware vSphere 6 environments. Knowing VMware 2V0-621D exam topics are valuable in your preparation. Below are the details.

Section 1: Configure and Administer vSphere Security

Objective 1.1: Configure and Administer Role-based Access Control
Objective 1.2: Secure ESXi, vCenter Server, and vSphere Virtual Machines
Objective 1.3: Enable SSO and Active Directory Integration

Section 2: Configure and Administer Advanced vSphere Networking

Objective 2.1: Configure Advanced Policies/Features and Verify Network Virtualization Implementation
Objective 2.2: Configure Network I/O Control (NIOC)
Objective 2.3: Configure vSS and vDS Policies

Section 3: Configure and Administer Advanced vSphere Storage

Objective 3.1: Manage vSphere Storage Virtualization
Objective 3.2: Configure Software-defined Storage
Objective 3.3: Configure vSphere Storage Multi-pathing and Failover
Objective 3.4: Perform Advanced VMFS and NFS Configurations and Upgrades
Objective 3.5: Setup and Configure Storage I/O Control

Section 4: Upgrade a vSphere Deployment

Objective 4.1: Perform ESXi Host and Virtual Machine Upgrades
Objective 4.2: Perform vCenter Server Upgrades

Section 5: Administer and Manage vSphere Resources

Objective 5.1: Configure Advanced/Multilevel Resource Pools

Section 6: Backup and Recover a vSphere Deployment

Objective 6.1: Configure and Administer a vSphere Backups/Restore/Replication Solution

Section 7: Troubleshoot a vSphere Deployment

Objective 7.1: Troubleshoot vCenter Server, ESXi Hosts, and Virtual Machines
Objective 7.2: Troubleshoot vSphere Storage and Network Issues
Objective 7.3: Troubleshoot vSphere Upgrades

Section 8: Deploy and Consolidate vSphere Data Center

Objective 8.1: Deploy ESXi Hosts Using Autodeploy
Objective 8.2: Customize Host Profile Settings

Section 9: Configure and Administer vSphere Availability Solutions

Objective 9.1: Configure Advanced vSphere HA Features
Objective 9.2: Configure Advanced vSphere DRS Features
Objective 9.3: Setup and Configure AppHA

Section 10: Administer and Manage vSphere Virtual Machines

Objective 10.1: Configure Advanced vSphere Virtual Machine Settings
Objective 10.2: Create and Manage a Multi-site Content Library

20 Apr

2V0-621 VMware Certified Professional 6 – Data Center Virtualization Beta Exam

VMware Certified Professional 6 – Data Center Virtualization Beta Exam is the full name of 2V0-621 test. There are 100 questions in real VMware 2V0-621 test, which will take the candidates 120 minutes to complete the test. The Associated Certification is VCP6-DCV. The exam language is English. The exam format is Single and Multiple Choice. The exam price is $50.

It is important for the candidates to know VMware 2V0-621 exam objectives.

Section 1: Configure and Administer vSphere Security

Objective 1.1: Configure and Administer Role-based Access Control
Objective 1.2: Secure ESXi, vCenter Server, and vSphere Virtual Machines
Objective 1.3: Enable SSO and Active Directory Integration

Section 2: Configure and Administer Advanced vSphere Networking

Objective 2.1: Configure Advanced Policies/Features and Verify Network Virtualization Implementation
Objective 2.2: Configure Network I/O Control (NIOC)
Objective 2.3: Configure vSS and vDS Policies

Section 3: Configure and Administer Advanced vSphere Storage

Objective 3.1: Manage vSphere Storage Virtualization
Objective 3.2: Configure Software-defined Storage
Objective 3.3: Configure vSphere Storage Multi-pathing and Failover
Objective 3.4: Perform Advanced VMFS and NFS Configurations and Upgrades
Objective 3.5: Setup and Configure Storage I/O Control

Section 4: Upgrade a vSphere Deployment

Objective 4.1: Perform ESXi Host and Virtual Machine Upgrades
Objective 4.2: Perform vCenter Server Upgrades

Section 5: Administer and Manage vSphere Resources

Objective 5.1: Configure Advanced/Multilevel Resource Pools

Section 6: Backup and Recover a vSphere Deployment

Objective 6.1: Configure and Administer a vSphere Backups/Restore/Replication Solution

Section 7: Troubleshoot a vSphere Deployment

Objective 7.1: Troubleshoot vCenter Server, ESXi Hosts, and Virtual Machines
Objective 7.2: Troubleshoot vSphere Storage and Network Issues
Objective 7.3: Troubleshoot vSphere Upgrades
Objective 7.4: Troubleshoot and Monitor vSphere Performance
Objective 7.5: Troubleshoot HA and DRS Configurations

Section 8: Deploy and Consolidate vSphere Data Center

Objective 8.1: Deploy ESXi Hosts Using Autodeploy
Objective 8.2: Customize Host Profile Settings
Objective 8.3: Consolidate Physical Workloads using VMware Converter

Section 9: Configure and Administer vSphere Availability Solutions

Objective 9.1: Configure Advanced vSphere HA Features
Objective 9.2: Configure Advanced vSphere DRS Features

Section 10: Administer and Manage vSphere Virtual Machines

Objective 10.1: Configure Advanced vSphere Virtual Machine Settings
Objective 10.2: Create and Manage a Multi-site Content Library
Objective 10.3: Configure and Maintain a vCloud Air Connection

10 Apr

VMware VCPC610 Exam Sample Questions

VMware VCPC610 exam sample questions are available. The VCPC610 Exam consists of 120 questions and a short pre-exam survey consisting of 10 questions. The passing score for this exam is 300, using a scaled scoring method. The scale is from 100-500.

Share some vmware VCPC610 exam sample questions below.

The storage administrator has recommended testing the performance benefits of jumbo frames and enabled jumbo frames on the storage array. The VMware administrator has enabled jumbo frames on the VMkernel port used for the software iSCSI initiator. What other two components must be modified to enable jumbo frames support for the software iSCSI initiator? (Choose two.)
A.The physical switch
B. The port group
C. The software initiator
D. The virtual switch
Answer: A, D

What two statements regarding the VSWP file are true? (Choose two.)
A.The VSWP file is equal to the memory allocation.
B. The VSWP file size is equal to the memory reservation.
C. The VSWP file size is equal to the difference between the memory assigned and reservation.
D. No VSWP file is created if reserved memory to the same value as allocated memory.
Answer: C, D

An administrator wants to reduce the amount of memory overhead required by a virtual machine. What two options below could be used to accomplish that task? (Choose two.)
A.Reduce the amount of memory configured for the VM.
B. Reduce the memory reservation for the VM.
C. Reduce the memory shares for the VM.
D. Reduce the number of vCPUs VM.
Answer: A, D

 

vca-vcp.com cart

09 Apr

VCPC610 Online Test-VMware Certified Professional 6 – Cloud

Currently, our VCPC610 online test only provide 20 questions. Answer one question correctly, you can get 5 points. The content of these questions are the latest exam content. Please feel free to test your skill level.

If you have some opinions or suggestions about our online test, please leave your message, we will improve it step by step.

Now, begin to test:

Please go to VCPC610 Online Test-VMware Certified Professional 6 – Cloud to view the test

 

vca-vcp.com cart

08 Apr

VCPC610 VMware Certified Professional 6 – Cloud

The VMware Certified Professional 6 – Cloud Exam tests certification candidates on their skills and abilities installing, configuring and administering a VMware vCloud environment. Successful candidates demonstrate mastery of these skills and abilities.

The VCPC610 Exam consists of 120 questions and a short pre-exam survey consisting of 10 questions. The passing score for this exam is 300, using a scaled scoring method. The scale is from 100-500. Scaled scores are calculated using a mathematical formula that considers a variety of factors, including the number and type of exam questions included in a specific version of the exam.

Knowing VMware VCPC610 exam objectives are valuable in your preparation.

Section 1 – Plan, Install, Configure and Upgrade vCenter Server and VMware ESXi

Objective 1.1 — Install and Configure vCenter Server
Objective 1.2 – Install and Configure VMware ESXi
Objective 1.3 – Plan and Perform Upgrades of vCenter Server and VMware ESXi
Objective 1.4 – Secure vCenter Server and VMware ESXi

Section 2 – Plan and Configure vSphere Networking

Objective 2.1 – Configure vSphere Standard Switches (vSS)
Objective 2.2 – Configure vSphere Distributed Switches (vDS)
Objective 2.3 – Configure vSphere Standard and Distributed Switch Policies

Section 3 – Plan and Configure vSphere Storage

Objective 3.1 – Configure Shared Storage for vSphere
Objective 3.2 – Create and Configure VMFS and NFS Datastores

Section 4 – Deploy and Administer Virtual Machines, vCloud vApps, and vCenter vApps

Objective 4.1 – Create and Deploy Virtual Machines
Objective 4.2 – Administer Virtual Machines

Section 5 – Establish and Maintain Service Levels

Objective 5.1 – Create and Configure VMware Clusters
Objective 5.2 – Create and Administer Resource Pools
Objective 5.3 – Migrate Virtual Machines
Objective 5.4 – Patch and Update ESXi and Virtual Machines

Section 6 – Perform Basic Troubleshooting and Alarm Management

Objective 6.1 – Perform Basic Troubleshooting for ESXi Hosts
Objective 6.2 – Perform Troubleshooting for High Availability and Distributed Resource Scheduler
Clusters and vMotion/Storage vMotion Migrations
Objective 6.3 – Perform Basic vCloud Automation Center Troubleshooting

Section 7 – Monitor vSphere and vCloud Implementations

Objective 7.1 – Monitor ESXi, vCenter Server and Virtual Machines
Objective 7.2 – Create and Administer vCenter Server Alarms
Objective 7.3 – Install, Configure, and Manage vCenter Operations Manager
Objective 7.4 – Audit vCloud Automation Center Resources and Events
Objective 7.5 – Map vCloud Automation Center Resources to vSphere Resources

Section 8 – Install and Configure vCloud Automation Center

Objective 8.1- Explain vCloud Suite Components and Features
Objective 8.2 – Install and upgrade vCloud Suite components
Objective 8.3 – Configure and Administer vCloud Connector Advanced Edition
Objective 8.4 – Configure vCloud Automation Center settings
Objective 8.5 – Integrate vCloud Automation Center with vCloud Air and Third Party Cloud Platforms

Section 9 – Administer vCloud Automation Center Users, Role and Privileges

Objective 9.1 – Create Roles and Apply Privileges to Roles
Objective 9.2 – Configure Tenant-Specific Active Directory/LDAP Integration

Section 10 – Create and Administer Cloud Networking

Objective 10.1 – Manage Network Services
Objective 10.2 – Explain NSX Integration with vCloud Automation Center Automation
Objective 10.3 – Configure and Manage vCloud Automation Center Networking
Objective 10.4 – Configure and Manage VXLAN

Section 11 – Configure and Administer Tenants and Business Groups

Objective 11.1 – Create and Manage Business Groups
Objective 11.2 – Create and Manage Tenants

Section 12 – Allocate and Manage vCloud Automation Center Resources

Objective 12.1 – Create and Manage Fabric Groups
Objective 12.2 – Create and Manage Reservations
Objective 12.3 – Create and Manage Reservation Policies

Section 13 – Create and Administer vCloud Automation Center Resources

Objective 13.1 – Create and Manage Machine/Multi-Machine Blueprints
Objective 13.2 – Create and Manage Service Catalog Entitlements
Objective 13.3 – Create and manage Service Catalog Items
Objective 13.4 – Create and manage Service Blueprints
Objective 13.5 – Create and manage a Property Dictionary
Objective 13.6 – Create and Manage Build Profiles

Section 14 – Extend a vCloud Automation Center Implementation

Objective 14.1 – Create Custom Services Using Advanced Service Designer
Objective 14.2 – Create and Modify Basic Orchestrator Workflows
Objective 14.3 – Create Basic Application Blueprints

07 Apr

VMware Certified Professional 6 – Cloud (VCP6-Cloud)

Earning VMware Certified Professional 6 – Cloud (VCP6-Cloud) certification validates that you have the skills and experience needed to effectively install, configure, and administer a cloud environment using VMware vCloud Automation Center and its related components.

VCP6-Cloud status shows that you not only have a solid foundation in managing successful vSphere environments, but that you also understand cloud infrastructure concepts including public/private/hybrid clouds, multi-tenancy, and cloud security.

Companies with VCP6-Cloud certified individuals on staff ensure their organization has the skills and expertise to fully utilize VMware solutions when transitioning virtualized data centers to a cloud environment.

Choose one of the paths below to earn your VCP6-Cloud Certification.

Path 1: Just starting with VMware Cloud technology.

1 Completing one of the following courses is required:

vCloud Automation Center: Install, Configure, Manage [V6.0]
vCloud Automation Center: Install, Configure, Manage [V6.0] On Demand
vCloud Automation Center: Install, Configure, Manage [V5.2]

2 Pass the exam and get certified

VMware Certified Professional 6 – Cloud: VCPC610 exam

Path 2: Already holding a valid VCP level certification.

1 Required Prerequisite: Valid VCP level certification. Completing one of the following courses is recommended.

vCloud Automation Center: Install, Configure, Manage [V6.0]
vCloud Automation Center: Install, Configure, Manage [V6.0] On Demand

2 Pass the exam and get certified

VMware Certified Professional 6 – Cloud: VCPC610 exam

24 Mar

vcp certification VCPD510 questions

vcp certification VCPD510 questions are available. The VCPD510 Exam consists of 135 questions and a short pre-exam survey consisting of 10 questions. The time limit for the VCPD510 exam is 120 minutes, with an additional 15 minutes to complete the survey questions and agreements.

Share vcp certification VCPD510 questions below.

An organization has a View Connection Server in DomainA. Users in DomainB need to access desktops on the existing connection server in DomainA. What must the system administrator do in Active Directory to enable users from DomainB to access desktops in DomainA?
A. set up a Security Server to proxy the connection to DomainB
B. check the multidomain authentication box in the View Manager Server Settings
C. set up a one-way trust relationship from DomainB to DomainA
D. set up a two-way trust relationship between DomainA and DomainB
Answer: D

An administrator creates a View Composer linked clone pool of Windows XP Desktops, and the operation fails to finish customizing the desktops. The error log below provides more detail.
2010-09-21 12:46:04,281 [836] INFO Guest – [Guest.cpp, 248] Attempting to join Test1 to the domain
vmw-dc.local f3 2010-09-21 12:46:04,562 [836] FATAL Guest -[Guest.cpp, 261] Domain join faileD. 1265
f3 2010-09-21 12:46:04,718 [836] FATAL CSvmGaService -[svmGaService.cpp, 116] Domain join
failedError 1265 (0x4f1): The system detected a possible attempt to compromise security. Please ensure that you can contact the server that authenticated you. What is the cause of the error?
A. Active Directory encryption levels
B. Active Directory group policy
C. Active Directory permissions
D. Active Directory root certificate
Answer: A

 

vca-vcp.com cart

17 Mar

vmware VCPC510 training courses

vmware VCPC510 training courses are available for the candidates to practice these questions. The VCPC510 Exam consists of 135 questions and a short pre-exam survey consisting of 10 questions. The VCPC510 exam is available in English.The time limit for the VCPC510 exam is 120 minutes, with an additional 15 minutes to complete the survey questions and agreements.

Share vmware VCPC510 training courses questions below.

Which two steps are part of transferring a virtual machine from one cloud to another using vCloud Connector? (Choose two.)
A. The VM is transferred from source to destination via multipart using checkpoint-restart.
B. A VIM API request is used to tell vCenter to export the VM.
C. A VIM API request is used at the destination to tell vCD to import the VM.
D. The VM is transferred from the source datastore directly to the destination vCD transfer storage.
Answer: A,B

Which three network types are supported by vCloud Director? (Choose three.)
A. External networks
B. Organization vDC networks
C. vApp networks
D. Internal networks
E. Fenced Networks
Answer: A,B,C

Which of the following are resource types available in vCenter Chargeback Manager? (Choose two.)
A. VMware vCenter Server
B. VMware ESXi host
C. vCenter Orchestrator
D. Cost Model
Answer: A,D

 

vca-vcp.com cart


Recent Posts


Tags

Administer and Manage vSphere Resources Administer and Manage vSphere Virtual Machines Administer Users Allocate and Manage vCloud Resources Backup and Recover a vSphere Deployment Configure Configure a Horizon View Environment Configure and Administer Advanced vSphere Networking Configure and Administer Advanced vSphere Storage Configure and Administer Tenants and Business Groups Configure and Administer vCloud Organizations Configure and Administer vSphere Availability Solutions Configure and Administer vSphere Security Configure and Upgrade vCenter Server and VMware ESXi Create and Administer Cloud Networking Create and Configure Horizon View Desktop Pools Deploy and Administer Virtual Machines Deploy and Administer Virtual Machines and vApps Deploy and Consolidate vSphere Data Center Establish and Maintain Service Levels Identify Install Install Horizon View Server Components Monitor a vSphere Implementation Perform Basic Troubleshooting Perform Basic Troubleshooting and Alarm Management Plan Plan and Configure vSphere Networking Plan and Configure vSphere Storage Roles and Privileges in a vCloud Troubleshoot a Horizon View Implementation Troubleshoot a vSphere Deployment Upgrade a vSphere Deployment VCAC510 exam VCAW510 exam vCloud vApps VCP550 exam VCP550D exam VCPC510 exam VCPC550 exam VCPC610 exam VCP certification VCPD510 exam VCPN610 exam VMware Certified Advanced Professional
Powered By VMware Exams Test Base